Brief Introduction
FAT-10C-1/2/4/8D supports 4E1 or 8E1, four electric ETH interfaces and one FC ETH interface; AC or DC power supply. It supports WEB SNMP GUI NMS. The transmitted E1 can be framed or un-framed format, the E1 interface of the same TDM over IP equipment can be connected with the different remote TDM over IP equipment.
Features
- Providing up to 8E1 interfaces;
- Providing four electric ETH interfaces and one FC ETH interface, herein 1ETH interfaces are uplink interfaces, and the other 4ETH interfaces are downlink service interfaces;
- Providing Optical ETH uplink interface;
- Having the high transmission efficiency, and the transmission delay can be adjusted;
- Supporting point to point, point to multi-point transmission;
- Supporting E1 framed, unframed setting;
- Supporting E1 loss alarm indication;
- Adopting UDP encapsulation, and supporting different types of Ethernet transmission channels;
- Supporting Ethernet PING package function;
- Ethernet supports 10/100M self-adaptive,half/full duplex self-adaptive;
- Supporting E1 package QoS assurance;
- The equipment firmware and software supports remote update function;
- Dual power protection, support AC220V or DC-48V(optional).
- Ethernet complies with IEEE 802.3 related recommendations, supports 10/100M self-adaptive, half/full duplex self-adaptive;
- E1 interface complies with ITU-T G.703 suggestions, the impedance is 120Ω, it adopts RJ45 connector;
- NMS port is ETH port or RS232 port, when adopting ETH NMS mode, it can manage any equipment inside the network;
- Power consumption: less than 5W
- Working temperature: -10°C to 50°C, humidity ≤90%(non-condensation)
- Dimensions: 224mm(w)×148.2mm(h)×4
Application
