Brief Introduction
FAT-50E-4/8E1 equipment support VLAN function, it is featured by very compact, minimum cost and low power consumption. It is ideal for application areas such as remote transmission in point-to-point links with small capacity and LAN extension.
Features
- NMS can provide alarm, performance monitoring, and local /remote equipment status, etc.;
- Optical interface: Optical interface: 150Mb/s, 20KM~120KM transmission without repeater;
- Providing 4E1 interface, Local/Remote loopback is supported;
- 4ETH interface, support VLAN, radio protection and enable or disable Ethernet interface;
- Providing EOW interface and NMS interface;
- Providing WEB,SNMP,GUI NMS;
- Supporting AC220V and DC-48V;
- Single board 1U high and 19 inch width standard shelf.
- Optical interface
Speed: 150Mb/s ±50ppm
Output optical power: ≥-15dBm
Receiving sensitivity: ≤-35dBm
Optical wave length: 1310nm/1550nm
Optical interface connector: SC/FC - 2M interface
Bit rate:2048Kbps ±50ppm
Code type: HDB3 code, conforming to G.703 standard
Input impedance: 75Ω(unbalanced interface), 120Ω(balanced interface) optional
Frame structure: Conforming to G.704, G.706
Compression law: Conforming to G.711
Level: ±2.37V ±10% - ETH interface (10/100M UTP)
Speed: 10/100Mbps, half/full duplex auto-negotiation
Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
Connector:RJ45 - ETH interface (100BASE/FX)
Speed: 10/100Mbps, half/full duplex
Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
Connector: RJ45 - Order Wire interface
Telephone set: standard 2 line telephone
Bandwidth : 64Kb/s
Coding: SFP/LC - Dimension and weight
Dimensions: 440mm(w)×220mm(h)×44mm(d)
Net weight: 2Kg - Power Supply
Input voltage: Standard value DC-48V and AC220V
Voltage range: DC-36V to DC-72V, AC176V ~ AC264V
Power consumption: <10W - Operation Environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5% ~ 95% (no condensation)
Storage Humidity: 5% ~ 95% (no condensation)
Application
